order Inquiries

Oblong Openings

This type of wire cloths have slotted openings to achieve a higher percentage of open area for a higher separating efficiency.
It is suited for screening such objects as fertilizers that tend to cause plugging.

For smaller opening sizes, round wires are combined with flat wires in Oblong Openings style for a higher stability.
The ratio of widthwise and lengthwise dimensions of an opening is generally 1:3.

Oblong Openings with round and flat wiresOblong Openings with round wires

Materials

Stainless steel, hard steel, galvanized steel, etc.

Please note:
Because of the slotted openings, the screening efficiency and service life of the product come to be different depending on the direction of the flow of objects to be processed and the orientation of the openings as shown in figures below. Please consult.

<Please check the texts in these drawings.>

Combination of Openings and Wire Diameters
Opening
mm
Wire Diameter
mm
Long Side
mm
Opening
mm
Wire Diameter
mm
Long Side
mm
30φ2.5 - φ1235 - 1005φ1.2 - φ36 - 50
20φ2.5 - φ1025 - 1004φ1.2 - φ36 - 50
15φ2 - φ620 - 1003.5φ210
12φ1.5 - φ515 - 703φ1 - φ25 - 25
10φ1.2 - φ515 - 702.5φ1.68
9φ1.2 - φ515 - 702φ1 - φ1.24 - 20
8φ1.2 - φ510 - 701.5φ1.25.5
7φ1.2 - φ410 - 701.2φ14.5
6φ1.2 - φ48 - 70   

●Flat top wire cloth with slotted openings can be also produced.
-Flat Top Wire Cloths with Oblong Openings

Click on image to enlarge.* The images are different in size from the real products.

Oblong Openings
Click on image to enlarge.Click on image to enlarge.Click on image to enlarge.
Slotted Openings
Flat Top Type
Φ3×(8×20) mm opening
Slotted Openings
Plain Weave Type
Φ3×(8×15) mm opening
Oblong Openings
Φ2.5×5/25 mm opening
Click on image to enlarge.Click on image to enlarge. 
Slotted Openings
Crimp Type
Φ3×(8×20) mm opening
Slotted Openings
with Round and Flat Wires
Φ3×(t2×w6)×(3×20) mm opening