注文・見積り お問い合わせ

Stock List

Home > OKUTANI WIRE NETTING,MFG,CO.,LTD. > About Perforated Metal > Stock List

There are many other products also in stock.
The quantity in stock may change according to market demands.

Products of non-standard sizes can also be quickly produced and delivered.

Please contact for more information.

 

Ordinary Steel 0.8-6t 914×1,829, 1,219×2,438
Stainless Steel 0.3-6.0t ◯1,000×2,000 only ◎1,000×2,000 & 1,219×2,438
Aluminum 0.5-3.0t ◯1,000×2,000 only ◎1,000×2,000 & 1,250×2,500
Stainless Steel Coil 0.2-1t SUS304

 

Stock of Ordinary Steel of Standard Sizes

◯914×1,892 only ◎1,219×2,438 only ●Both sizes available ★SECC

Type of material Cold Rolled Sheet Steel
SPCC-SD		 Hot Rolled Sheet Steel
SPHC -P
Item No. Hole Size × Pitch Pattern 0.8t 1.0t 1.2t 1.6t 2.3t 3.2t 4.5t 6.0t
1327-78 Round & Cloverleaf 45deg.
Staggered		 ● ● ● ● ●      
2025 1.0φ×2.0P 60deg.
Staggered		 ◯ ◯            
2031 1.5φ×3.0P 60deg.
Staggered		 ◯              
2033 2.0φ × 3.0P 60deg.
Staggered		 ◯              
1020 2.0φ×3.5P 60deg.
Staggered		 ◯ ◯   ◯        
2035 3.0φ×4.0P 60deg.
Staggered		   ◯            
2036 3.0φ×4.5P 60deg.
Staggered		     ◎          
1027 3.0φ×5.0P 60deg.
Staggered		 ◯ ● ● ● ● ●    
1035 4.0φ×7.0P 60deg.
Staggered		 ●         ◯    
2050 5.0φ×6.5P 60deg.
Staggered		     ◎          
1039 5.0φ×8.0P 60deg.
Staggered		 ● ● ● ● ● ●    
2057 6.0φ×8.0P 60deg.
Staggered		       ◯ ●      
1042 6.0φ×9.0P 60deg.
Staggered		 ◯ ● ● ● ● ● ◯  
2065 8.0φ×10P 60deg.
Staggered		   ◯            
1047 8.0φ×12P 60deg.
Staggered		   ● ● ● ● ● ◯ ◯
1049 10φ×15P 60deg.
Staggered		 ◯ ● ● ● ● ● ● ●
1182F 8.0sq×16.5P Staggered       ◯        
2180 ★11.5sq×20P Staggered       ◎        
1332 ★Cloverleaf Staggered       ◎        
Item No. Hole Size/Pitch Pattern 0.8t 1.0t 1.2t 1.6t 2.3t 3.2t 4.5t 6.0t

t: Thickness (gauge) of material

φ: Hole diameter (mm)
P: Hole pitch = distance between hole centers
Unit: millimeter (mm)

Stainless Steel

◯1,000×2,000 only　◎1,000×2,000 & 1,219×2,438 available

Type Item No. Hole Size/Pitch Pattern 0.3t 0.4t 0.5t 0.6t 0.8t 1.0t 1.2t 1.5t 2.0t 3.0t 4.0t 6.0t
SUS304
 1327 ◯　Cloverleaf 45deg.
Staggered		 ◯ ◯ ◯   ◯ ◎ ◯ ◯        
2005 0.5φ×1.0P 60deg.
Staggered		 ◯ ◯                    
2009 0.8φ×1.5P 60deg
Staggered		       ◯                
2025 1.0φ×2.0P 60deg.
Staggered		     ◯ ◯ ◯ ◯            
2031 1.5φ×3.0P 60deg.
Staggered		     ◯   ◯ ◯ ◯ ◯        
2033 2.0φ×3.0P 60deg.
Staggered		     ◯     ◯   ◎        
1020 2.0φ×3.5P 60deg.
Staggered		     ◯ ◯ ◯ ◯ ◯ ◯        
1022 2.0φ×4.0P 60deg.
Staggered		                 ◎      
2038 2.5φ×4.0P 60deg.
Staggered		           ◯            
2035 3.0φ×4.0P 60deg.
Staggered		     ◯   ◯ ◯   ◎ ◎      
1027 3.0φ×5.0P 60deg.
Staggered		   ◯ ◯ ◯ ◎ ◎ ◎ ◎ ◎ ◯    
2043 4.0φ×6.0P 60deg.
Staggered		           ◯   ◯        
1035 4.0φ×7.0P 60deg.
Staggered		         ◯ ◯ ◯ ◯ ◯      
1039 5.0φ×8.0P 60deg.
Staggered		     ◯ ◯ ◎ ◎ ◎ ◎ ◎ ◎    
2057 6.0φ×8.0P 60deg.
Staggered		           ◯   ◯        
1042 6.0φ×9.0P 60deg.
Staggered		       ◯ ◯ ◯ ◯ ◎ ◯      
2065 8.0φ×10P 60deg.
Staggered		       ◯ ◯ ◯ ◯ ◯ ◯      
1047 8.0φ×12P 60deg.
Staggered		         ◯ ◯   ◎ ◯ ◯    
1047 8.0φ×12P 60deg.
Staggered
HL SPV		               ◯        
1049 10φ×15P 60deg.
Staggered		       ◯ ◎ ◎ ◎ ◎ ◎ ◎ ◯ ◯
1049 10φ×15P 60deg.
Staggered
HL SPV		               ◯        
2082 12φ×18P 60deg.
Staggered		               ◯        
2084 15φ×20P 60deg.
Staggered		           ◯ ◯ ◯ ◯      
2090 20φ×30P 60deg.
Staggered		               ◯ ◯      
2105 8.0sq×10P Straight           ◯            
2213
Round End Slot		 (3.0×20)×
P(7.0×25)
Staggered L&L		         ◯              
2214
Round End Slot		 (4.0×25)×
P(7.0×30)		 Straight S&L         ◯              
1372 Antislip Finish 45deg.
Staggered		                   ◯    
SUS430
 1027 3.0φ×5.0P 60deg.
Staggered		         ◯ ◯            
1039 5.0φ×8.0P 60deg.
Staggered		       ◯ ◯ ◯            
Type Item No. Hole Size/Pitch Pattern 0.3t 0.4t 0.5t 0.6t 0.8t 1.0t 1.2t 1.5t 2.0t 3.0t 4.0t 6.0t

t: Thickness (gauge) of material
φ: Hole diameter (mm)
P: Hole pitch = distance between hole centers
Unit: millimeter (mm)
HL SPV: Hairline finish with surface protective film
L&L: Long side of slot in longer direction of sheet
S&L: Short side of slot in longer direction of sheet

Aluminum

◯1000×2000 only ◎1000×2000 & 1250×2500

Type Item No. Hole Size/Pitch Pattern 0.5t 0.8t 1.0t 1.5t 2.0t 3.0t
A1050P 1327 Round and Cloverleaf 45deg.
Staggered		   ◯ ◯      
2025 1.0φ×2.0P 60deg.
Staggered		     ◯      
1020 2.0φ×3.5P 60deg.
Staggered		     ◯      
1027 3.0φ×5.0P 60deg.
Staggered		 ◯ ◯ ◯ ◯ ◯  
1039 5.0φ×8.0P 60deg.
Staggered		   ◯ ◯ ◯ ◯  
1042 6.0φ×9.0P 60deg.
Staggered		   ◯ ◯      
2065 8.0φ×10P 60deg.
Staggered		     ◯      
1047 8.0φ×12P 60deg.
Staggered		         ◯  
1049 10φ×15P 60deg.
Staggered		     ◯ ◯ ◯  
A1100 with SPV in One Side 1027 3.0φ×5.0P 60deg.
Staggered		     ◯ ◯ ◯  
1039 5.0φ×8.0P 60deg.
Staggered		     ◯ ◎ ◎ ◯
1042 6.0φ×9.0P 60deg.
Staggered		     ◯ ◯ ◯  
1047 8.0φ×12P 60deg.
Staggered		       ◎ ◎  
1049 10φ×15P 60deg.
Staggered		     ◯ ◎ ◎ ◯
2082 12φ×18P 60deg.
Staggered		       ◯ ◯  
2084 15φ×20P 60deg.
Staggered		       ◯ ◯  
2090 20φ×30P 60deg.
Staggered		       ◯ ◯  
Type Item No. Hole Size/Pitch Pattern 0.5t 0.8t 1.0t 1.5t 2.0t 3.0t

t: Thickness (gauge) of material
φ: Hole diameter (mm)
P: Hole pitch = distance between hole centers
Unit: millimeter (mm)
SPV: Surface protective film

Stock of Super PunchingTM　SUS304 Series

Unit: mm (if not specified)

Item No. Plate Thickness
(T)		 Hole Size
（φ）		 Pitch
（p）		 Pattern Open Area
(%)		 Size in Stock
(without margins)
3020 1.0 0.8 1.6 60deg.
Staggered		 22.7 　500×1000
3025 1.2 1.0 2.0 60deg.
Staggered		 22.7 1000×1000
3028 1.2 1.0 3.0 60deg.
Staggered		 10.1 1000×2000
3029 1.5 1.0 2.0 60deg.
Staggered		 22.7 　500×1000
2033 1.5 2.0 3.0 60deg.
Staggered		 40.3 1000×2000
3173 1.5 5.0 6.0 60deg.
Staggered		 63.0 1000×2000
3045 2.0 1.5 3.0 60deg.
Staggered		 22.7 1000×1000
3050 2.0 2.0 3.0 60deg.
Staggered		 40.3 1000×1000
1022 2.0 2.0 4.0 60deg.
Staggered		 22.7 1000×2000
2035 2.0 3.0 4.0 60deg.
Staggered		 51.0 1000×2000
3090 3.0 3.0 4.0 60deg.
Staggered		 51.0 1000×1000
3100 4.0 3.0 5.0 60deg.
Staggered		 32.6 1000×2000
3175 6.0 5.0 8.0 60deg.
Staggered		 35.4 1000×1000
Item No. Plate Thickness (T) Hole Size（φ） Pitch（p） Pattern Open Area (%) Size in Stock
(without margins)

We supply these items in our standard sizes or cut to any size. Others are also available on MTO (make to order) basis.
For any other hole pattern, thickness and sheet size, please contact us.
Our Standard items of Super PunchingTM

Stainless Steel Coil

SUS304

Item No. Thickness Hole Size Pitch Pattern Mesh Open Area(%) Width Length
2002 0.2ｔ 0.35φ 1.05 60deg.
Staggered		 670 10.1 500 Coil
2003 0.3ｔ 0.40φ 1.22 60deg.
Staggered		 516 9.7 1000 Coil
2004 0.3ｔ 0.45φ 1.00 60deg.
Staggered		 740 18.2 1000 Coil
2005 0.3ｔ 0.50φ 1.00 60deg.
Staggered		 740 22.7 1000 Coil
2006 0.3ｔ 0.55φ 1.09 60deg.
Staggered		 625 23.1 1000 Coil
2006 0.4ｔ 0.55φ 1.09 60deg.
Staggered		 625 23.1 1000 Coil
2006 0.5ｔ 0.55φ 1.09 60deg.
Staggered		 625 23.1 395 Coil
2007 0.5ｔ 0.63φ 1.22 60deg.
Staggered		 502 24.2 1000 Coil
2008 0.5ｔ 0.75φ 1.19 60deg.
Staggered		 525 36.0 1000 Coil
2009 0.6ｔ 0.80φ 1.50 60deg.
Staggered		 330.8 25.8 1000 Coil
2020 0.5ｔ 1.00φ 1.50 60deg.
Staggered		 330.8 40.3 1000 Coil
2025 0.5ｔ 1.00φ 2.00 60deg.
Staggered		 186 22.7 1000 Coil
2026 0.5ｔ 1.20φ 1.80 60deg.
Staggered		 231 40.3 1000 Coil
2027 1.0ｔ 1.20φ 2.25 60deg.
Staggered		 147 25.8 1000 ☆2000
2028 0.5ｔ 1.50φ 2.00 60deg.
Staggered		 186 51.0 1000 Coil
2029 1.0ｔ 1.50φ 2.25 60deg.
Staggered		 147 40.3 1000 ☆2000
2200 0.5ｔ W×L=0.3×4.0(*1) 1.4×5.5 Straight S&L 83 15.6 400 Coil
2203 0.5ｔ W×L=0.35×4(*1) 1.2×5.5 Straight S&L 97.7 21.2 400 Coil
2206 0.7ｔ W×L=0.4×4(*1) 1.55×5.5 Straight S&L 76.1 18.8 400 Coil
2209 0.4ｔ W×L=0.45×4(*1) 1.2×5.5 Staggered S&L 97.7 27.3 400 Coil
Item No. Thickness Hole Size Pitch Pattern Mesh Open Area(%) Width Length

t: Thickness (gauge) of material
φ: Hole diameter (mm)
P: Hole pitch = distance between hole centers
Unit: millimeter (mm)
(*1): Products in stock are of 1 m×2 m.
(*2): Hole shape: Square End Slot
Coils can be cut to desired length.

There are many other products also in stock.
The volume of inventory may change according to market demands.
Products of non-standard sizes can also be quickly produced and delivered.
Please contact us for more information.

営業日カレンダー

2024年4月
日 月 火 水 木 金 土
  1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30        
2024年5月
日 月 火 水 木 金 土
      1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31  
■休業日
メールでのご注文は毎日、24時間承っております。
（対応は翌営業日とさせていただきます。）