To prevent skewing of the mesh, the wires are pre-crimped at their point of intersection, so that warp and shute wires embrace each other over a half of their circumference.
This type of wire cloth is specifically employed for shifting out very coarse particles.
Wire cloths with openings of 4 to 100 mm are used for shifting out large- to medium-size particles.
It is optimum for vibration screens, because it is woven to provide a smooth surface, the friction is even, and a longer service life is achieved in comparison with Intermediate Crimp wire cloths
Stainless steel, hard steel, galvanized steel, etc.
Combination of Openings and Wire Diameters | ||||
---|---|---|---|---|
Opening mm | Wire Diameter mm | Opening mm | Wire Diameter mm | |
63.5 | φ10 | 20 | φ4·φ2 | |
50.8 | φ10 | 17 | φ6 | |
50 | φ6・φ5 | 16 | φ6 | |
45 | φ5 | 15 | φ2 | |
40 | φ8 | 12 | φ2.6 | |
30 | φ6・φ4 | 10 | φ3・φ2 | |
25 | φ5 | 5 | φ2 |
日 | 月 | 火 | 水 | 木 | 金 | 土 |
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
7 | 8 | 9 | 10 | 11 | 12 | 13 |
14 | 15 | 16 | 17 | 18 | 19 | 20 |
21 | 22 | 23 | 24 | 25 | 26 | 27 |
28 | 29 | 30 |
日 | 月 | 火 | 水 | 木 | 金 | 土 |
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | |||
5 | 6 | 7 | 8 | 9 | 10 | 11 |
12 | 13 | 14 | 15 | 16 | 17 | 18 |
19 | 20 | 21 | 22 | 23 | 24 | 25 |
26 | 27 | 28 | 29 | 30 | 31 |