All crimping is offset to the bottom side, producing a smooth top surface.
For standard vibration screens, the ratio between a wire diameter and an opening size is 1 : 3 (with wire of 30 mm or smaller diameters).
Stainless steel, hard steel, galvanized steel, etc.
Combination of Openings and Wire Diameters | ||||
---|---|---|---|---|
Opening mm | Wire Diameter | Heavier Wire mm | Wire Diameter | |
100 | φ20·φ12·φ10 | 25 | φ8·φ6·φ5·φ4·φ3 | |
90 | φ16 | 20 | φ6·φ5·φ4·φ3·φ2.6 | |
80 | φ12·φ10·φ9 | 15 | φ5·φ4·φ3·φ2.6·φ2 | |
70 | φ13·φ12·φ10·φ9 | 10 | φ3·φ2.6·φ2·φ1.5 | |
60 | φ13·φ12·φ10·φ9·φ8 | 8 | φ3·φ2.6·φ2.3·φ2·φ1.6 | |
50 | φ13·φ10·φ9·φ8 | 6 | φ2·φ1.6·φ1.5·φ1.2 | |
40 | φ10·φ9·φ8 | 5 | φ2·φ1.5·φ1.2 | |
35 | φ10·φ9·φ8·φ7 | 4 | φ1.6·φ1.2 | |
30 | φ8·φ7·φ6·φ5·φ4 |
Click on image to enlarge.* The images are different in size from the real products.
Flat Top (Smooth Top) Crimp | ||
---|---|---|
Φ1.6×10 mm opening | Φ10×40 mm opening | Φ6×20 mm opening |
日 | 月 | 火 | 水 | 木 | 金 | 土 |
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | |||
5 | 6 | 7 | 8 | 9 | 10 | 11 |
12 | 13 | 14 | 15 | 16 | 17 | 18 |
19 | 20 | 21 | 22 | 23 | 24 | 25 |
26 | 27 | 28 | 29 | 30 | 31 |
日 | 月 | 火 | 水 | 木 | 金 | 土 |
---|---|---|---|---|---|---|
1 | ||||||
2 | 3 | 4 | 5 | 6 | 7 | 8 |
9 | 10 | 11 | 12 | 13 | 14 | 15 |
16 | 17 | 18 | 19 | 20 | 21 | 22 |
23 | 24 | 25 | 26 | 27 | 28 | 29 |
30 |