Item | Dimension | ||||||||
Diameter (D1 and D2) | 300 | 200 | |||||||
Depth (H1) | 100,60 | 100,60,45 | |||||||
Thickness of Frame | Frame above Cloth Surface (t1) | 0.6 | 0.6 | ||||||
Frame below Cloth Surface (t2) | 1.0 | 1.0 | |||||||
Tolerance | Inner Diameter at 5 mm below Frame Upper Edge (D1) |
|
| ||||||
Inner Diameter of Frame below Cloth Surface (D2) |
|
|
* Note that the figure above is intended solely for layout purposes, and not to limit the structure of sieves.
Item | Material |
Plate | C2720R specified by JIS H 3100 SUS304 specified by JIS G 4305 SS400 specified by JIS G 3100 |
Cylindrical Frame | C2720R specified by JIS H 3100 SUS304 specified by JIS G 4305 |
Determination of Pitch for Circular Holes | Determination of Pitch for Square Holes |
日 | 月 | 火 | 水 | 木 | 金 | 土 |
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | |||
5 | 6 | 7 | 8 | 9 | 10 | 11 |
12 | 13 | 14 | 15 | 16 | 17 | 18 |
19 | 20 | 21 | 22 | 23 | 24 | 25 |
26 | 27 | 28 | 29 | 30 | 31 |
日 | 月 | 火 | 水 | 木 | 金 | 土 |
---|---|---|---|---|---|---|
1 | ||||||
2 | 3 | 4 | 5 | 6 | 7 | 8 |
9 | 10 | 11 | 12 | 13 | 14 | 15 |
16 | 17 | 18 | 19 | 20 | 21 | 22 |
23 | 24 | 25 | 26 | 27 | 28 | 29 |
30 |