The warp wires remain straight, while the shute wires are woven the same way as the plain weave wire cloth to lie very close to each other, creating a high-density wire cloth.

Materials

Stainless steel, nickel, Monel metal, phosphor bronze, other metals

Plain Dutch Weave

●In the case of the Plain Dutch Weave, opening sizes are not accurate. Values shown below should be taken as just rough estimations.

MESH		Wire Diameter	Estimated Diameter of Penetrating Particle	Thickness	Weight
	Warp×Shute	mm	μ m	mm	kg/m2
50 MESH	10×50	0.80/0.55	360	1.40	5.7
64 MESH	12×64	0.58/0.43	300	1.25	4.2
80 MESH	14×80	0.45/0.35	250	1.00	3.6
100 MESH	16×100	0.35/0.28	200	0.80	2.7
110 MESH	24×110	0.35/0.25	155	0.80	2.7
120 MESH	24×120	0.33/0.23	150	0.75	2.5
130 MESH	30×130	0.33/0.22	133	0.74	2.5
136 MESH	32×136	0.32/0.21	122	0.70	2.6
150 MESH	30×150	0.26/0.19	125	0.55	2.0
160 MESH	30×160	0.23/0.17	110	0.54	1.7
180 MESH	42×180	0.30/0.165	85	0.53	2.2
200 MESH	24×200	0.22/0.14	88	0.50	1.6
	40×200	0.18/0.14	90	0.38	1.4
250 MESH	50×250	0.14/0.11	78	0.34	1.0
300 MESH	50×300	0.14/0.09	68	0.29	0.9
400 MESH	70×400	0.12/0.065	50	0.23	0.7
450 MESH	80×450	0.14/0.063	48	0.27	0.75
500 MESH	80×500	0.094/0.055	36	0.18	0.55

★ Often used for centrifugal separation.